Cisco OL-21851-01 - Manual (Page 24)

5-24
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
OL-21851-01
Chapter 5 Configuring and Managing the Cisco Unified IP Phone
Verifying and Troubleshooting IP Phone Configuration
MLPP Information
Leave the following fields unchanged:
• Multilevel precedence
• Preemption information
Line X on Device X
Leave all fields unchanged. See the “Line X on Device X” section on page 1-36 .
Multiple Call/Call Waiting Settings on Device X
See the “Multiple Call/Call Waiting Settings on Device SEPXXXXXXXXXXXX” procedure on
page 1-37 .
Forwarded Call Information Display on Device X
Leave the following information unchanged in the Forwarded Call Information Display on Device X
Settings box:
• Caller Name
• Caller Number
• Redirected Number
• Dialed Number
Verifying and Troubleshooting IP Phone Configuration
The following sections describe how to verify your Cisco TelePresence System (CTS) with
Cisco Unified Communications Manager (Unified CM) configuration:
• Verifying Your Configuration, page 5-24
• Troubleshooting Your IP Phone Configuration, page 5-25
• Managing Phone Reset and Codec Connectivity, page 5-27
Verifying Your Configuration
To verify that your Cisco TelePresence System is configured successfully:
Step 1 Log in to the Cisco Unified CM Administration interface.
Step 2 From the Device drop-down menu, choose Phone. The Find and List Phones Page appears.
Step 3 Search for a phone using the fields provided or choose a phone from the drop-down menu.
Tip Search for a device type that contains “7970” or “7975.”