Cabletron Systems SEHI100TX-22 - Manual (Page 78)

Appendix A: EPIM Specifications
A-2 SEHI100TX User’s Guide
A.1.2 EPIM-100FX
The EPIM-100FX shown in Figure A-2 supports Multimode Fiber Optic
cabling. The EPIM-100FX is equipped with an SC style connector.
Specifications for the EPIM-100FX are listed in Table A-1.
Figure A-2 EPIM-100FX
The transmitter power levels and receive sensitivity levels listed are peak
power levels after optical overshoot. A peak power meter must be used to
correctly compare the values given above to those measured on any
particular port. If power levels are being measured with an average power
meter, add 3 dBm to the measurement to compare the measured values to
the values listed above.
Table A-1 Transmitter Power (EPIM-100FX)
Cable Type Worst Case Budget Typical Budget
50/125
µ
m fiber optic 6.0 dB 9.0 dB
62.5/125
µ
m fiber optic 9.0 dB 12.0 dB
100/140
µ
m fiber optic 15.0 dB 18.0 dB
EPIM 1 5X 4X 3X 2X 1X
16X 15X 14X 13X 12X
EPIM- 100FX
LNK
1511_17