Cabletron Systems SEHI100TX-22 - Manual (Page 60)

Chapter 7: Local Management
7-12 SEHI100TX User’s Guide
7.6 THE CONFIGURATION SCREEN
To access the Configuration screen from the Feature Selection screen, use
the arrow keys to highlight the IP Address Assignment option, then
press ENTER or F7. The screen shown in Figure 7-5 appears.
Figure 7-5 Configuration Screen
Assign the IP Address, Subnet Mask, and Default Gateway through the
SEHI Configuration screen. Use the Port Enable Override option to
enable all device ports in the stack. This option overrides the Port Disable
setting in the Statistics screen.
The following sections explain each field on the Configuration screen and
instructions on how to change them.
I/F
The number of the interface corresponding to the channels over which
packets with that IP Address pass. On the SEHI, this value is always 1.
Cabletron SEHI Revision X.XX.XX
CONFIGURATION
SEHI LOCAL MANAGEMENT
SAVE COMMUNITY NAMES TRAP TABLE SNMP TOOLS RETURN
F6 F7 F8 F9
I/F IP Address SubNET Mask MAC Address
1 000.000.000.000 000.000.000.000 00-00-1d-05-dc-36
Default Gateway: 0.0.0.0
Serial Port 1 Application: CONSOLE Baud Rate: 9600 --ACTIVE--
Port Enable Override: OVERRIDE DISABLED
1490_24