Cabletron Systems SEHI100TX-22 - Manual (Page 59)

The Community Name Table Screen
SEHI100TX User’s Guide 7-11
7.5.1 Editing the Community Name Field
The password used to access Local Management at the Password screen
must have Super-User privileges for the edits to take effect. If a password
is entered with Basic-Read, Read-Only, or Read-Write privileges, Local
Management displays the message “AUTHORIZATION PROHIBITS
ACCESS”, and does not include editing capabilities.
Use the following steps to edit the Community Name field:
1. Use the arrow keys to highlight the Community Name field adjacent
to the desired access level.
2. Enter the community name (maximum of 32 characters) into the field.
3. Press ENTER.
4. Repeat steps 1 through 3 for editing any of the other community
names.
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen, then press ENTER or F6. The “SAVED OK” message
appears indicating that the edits have been saved to memory.
6. To exit the screen, press the appropriate Function key or use the arrow
keys to highlight the RETURN command.
7. Press ENTER. The Feature Selection screen appears.
NOTE
The first time a user attempts to exit the screen without saving
the changes, a “NOT SAVED?” message is displayed. The
edits are lost if the user proceeds to exit without saving the
changes.