Juniper Systems Mesa with Barcode Scanner User Manual

Page 26

Mesa Barcode Scanner Owner’s Manual

5 – I don’t know what type of barcode I am trying

to scan.
Reason/Solution: Enable all the barcode types

on the 1D Code Types, Composite/Postal Code

Types, and 2D Code Types tabs (some types are

mutually exclusive). Go to the Test tab. Scan the

barcode and the Code Type window shows the

type of barcode scanned. When you are finished,

go back and deselect barcode types you are not

using.
6 – My TLC-39 Composite barcode will not scan.
Reason/Solution: On the 1D Code Types tab

ensure that Code 39 is checked. Also select

Options, then the Code 39 tab and ensure that

Convert Code 39 to Code 32 is unchecked.
7 – My UPC barcode will not scan.
Reason/Solution: On the 1D Code Types tab

ensure that barcode types UPC-A, UPC-E and

UPC-E1 are checked. If composites codes are

also enabled on the Composite/Postal Code

Types tab and you still want to allow a UPC 1D to

scan, select Autodiscriminate from the drop down

list. Also go to the 1D Code Types tab, select

Options, then the tabs for UPC/EAN-1 and UPC/

EAN-2. Make sure the settings are correct for your

application.