Juniper Systems Mesa with Barcode Scanner User Manual

Page 25

Mesa Barcode Scanner Owner’s Manual

3 – I need to set up several Mesas the same way.

Do I need to configure all of them individually?
Reason/Solution: You don’t need to configure

them individually. Set up one Mesa the way you

want all the Mesas to be configured. Copy the

“LastUser.cfg” file from this Mesa located at

“\Program Files\Barcode Connector” to the other

Mesas. (You can use a thumb drive to transfer the

information from one Mesa to another or transfer

it to a PC and download it from there to the

other Mesas using synchronization software. See

the Mesa manual for details). If you want to be

able to restore to this point, after you set up the

first Mesa, go to the Profiles tab, and save these

settings as Profile 1. Copy the “Profile1.cfg” file

located at “\Program Files\Barcode Connector”

to the other Mesas. Now all the Mesas can load

from Profile 1 to get back to this restore point.
4 – When I read a barcode, the data returned is

not correct.
Reason/Solution: Ensure that the configurations

are set up correctly so you are given the

information you need. For example, to read a

Code 32 barcode, on the 1D Code Type tab,

ensure that Code 39 is selected. Select Options,

and on the Code 39 tab ensure that Convert

Code 39 to Code 32 is selected.