Juniper Systems Mesa with Barcode Scanner - Manual (Page 12)

12 Mesa Barcode Scanner Owner’s Manual
User Tab
The User tab has the following functions:
„
Select Scan Button – Configure which of the
four top function buttons on the Mesa will be
the scan button (notes is the default).
„
Trigger Mode While Holding Scan Button –
Select Scan to start scanning the moment the
button is pressed. Select Aim to turn on the
aimer when the button is pressed and to start
scanning when the button is released.
„
Beep On and Visual On – Select options for
audio and visual indicators based on good or
bad scan reads.