Philips DV900VHS0I - Manual (Page 60)

60
Programmed Playback
AUDIO CD
You may determine the order in which Tracks will play. The order
that you set is called the Program. To set up programmed playback,
follow these steps.
• Before you begin, place the DVD/VCR in DVD mode.
Press the DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
While playback is stopped, press the DVD button, then
press the MODE button. The program screen will appear.
4
PROGRAM
14 TOTAL OhOOmOOs
lU»’.:V*Slan l^H;filtinalateinailUl«Fvit
2-
2
Press the Number buttons or the a ./’ v buttons to enter
the number of the first Track that you want to play.Then,
press the ENTER button to store the selected Track in the
Program.
• If you enter a wrong Track number, press the CLEAR button. The
last Track in the Program will be removed.
position in program
track number
3
Repeat step 2 until you have selected all the Tracks you
wish to play in the Program.
• Up to 20 Tracks may be stored in the Program.
• Make sure the Track numbers you enter are available on the
Audio CD. If it is not, you will have to enter a different track.
4
Press the PLAY button. The Tracks wilt play in the order in
which you programmed them,The Program will play once.
• The contents of the program will be stored until you turn off
the DVD/VCR or open the Disc tray.
Hints
Specific Track and random play­
back cannot be combined with
programmed playback. During pro­
grammed playback, the MODE
and SEARCH MODE buttons will
not operate.
You may play a Program repeated­
ly. During programmed playback,
press the REPEAT button so that
REPEAT [ON] appears. The pro­
gram will play over and over.
To see which Tracks you stored in
the Program, press the STOP but­
ton to stop playback, then press
the MODE button so that the
PROGRAM screen appears.
Programmed playback can only be
started from the program screen.