Philips DV900VHS0I - Manual (Page 32)

32 Playing a Video Cassette Tape
VCR Turn on the TV,
Read and follow the steps below to play a tape.
Turn on the TV and set it to channel 3 or 4, whichever chan­
nel the CH3/CH4 switch on the back of the DVD/VCR is set to.
Or, if you connected the DVD/VCR to the TV using audio and
video cables, select the correct audio and video in channel at the
TV. Details are on poge 12.
2
Insert a tape in the cassette compartment of the
DVD/VCR. The POWER,VCR.VCR/TV and CST IN lights will
appear on the front of the DVD/VCR. If the tape’s record tab has
been rernoved, playback will start automatically.
3
If playback does not start automatically, press the VCR
button, then press the PLAY button.
4
Press the STOP button to stop playback.
5
Press the REW(ind) button to rewind the tape.
6
After the tape stops, press the STOP/EJECT button on
the DVD/VCR to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit allows you to view a tape recorded in S-VHS format. A
tape recorded in S-VHS format will play the same as a tape record­
ed in normal format. This unit detects whether the tape is recorded
in S-VHS format or in normal format.
2
Insert a tape in the
DVD/VCR.
CD CD CD
GD CD CD
CD CD CD
SPEED fiO
□ CD □
» jphi clear
CD a CD
t-IENU TiTtE
Q. .I .O O O
( < I O o CD
PHILIPS
Helpful Hints
If the tape you wont to play is
already in the DVD/VOi make sure
the DVD/VCR power is on and the
DVD/VCR is in VCR mode and VCR
position. (The VCR light and the
VCR/TV light will appear on the front
of the DVD/VCR.) Then press the
PLAY button.
Other tape playback options and
features are on pages 41-48.
When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR Noise lines (black and white
streaks) may appear on the picture.
If REPEAT PLAY is set to ON, play­
back will begin automabcolly, even
when the record tab is intact