Philips DV900VHS0I - Manual (Page 39)

Checking or Cancelling Timer Recordings
» Before you begin, place the DVD/VCR in VCR mode.
Press the DVD/VCR OUTPUT button so that the VCR light
appears on the front of the DVD/VCR.
Timer Recording (cont*d) 39
2 "4
With the DVD/VCR on and in VCR mode and in VCR position
{press theVCR/TV button so that theVCR/TV light appears on the
front of the DVD/VCR), press the VCR button, then press the
MENU button.
2
Press the PLAY button or the STOP button to select
PROGRAM, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select
PROGRAM REVIEW, then press the F.FWD button. The
timer recording information for the program in the lowest num­
bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD button.
4
Press the F.FWD button repeatedly to review all pro­
grammed timer recordings. If you don’t press the F.FWD but­
ton within 10 seconds, the DVD/VCR wit! automatically display
information about the next programmed timer recording.This will
continue until all timer recordings have been displayed.Then the
menu will disappear.
5
To cancel the timer recording displayed, press the CLEAR
button. Either the display wilt disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I -4 to make sure you have cleared the cor­
rect timer recording.
I
Helpful Hints
CLASH may flash on the screen when
you finish setting a timer recording.
This means thot the timer recording
you just programmed and another
timer recording overlap. The current
timer recording will not take place. You
may choose to cancel the overlapping
timer recording.
To stop a started timer recording press
the STOP/EjECT button or the TIMER
SET button on the front of the
omvcR.
If the power fails for more than one
minute, programmed timer recordings
will be lost If this occurs, repeat the
steps on pages 16 and 20 before
resetting the timer recordings.
If the preset time for a timer record­
ing comes up during an OTR, the OTR
has priority. A message will remind you
when the timer recording was sched­
uled to begin. Vbu may let the OTR
continue; the timer recording will not
take place. Or, stop the OTR and press
the TIMER SET button immediately.
The timer recording will take place if
you press the TIMER SET button
before the timer recording’s scheduled
start time.
See page 78 for more hints.