Philips DV900VHS0I - Manual (Page 13)

Optional Hookups (cont*d) 13
Connecting to a TV and a Stereo
TV has Com ponent Video In Jacks
• Set DOLBY DIGITAL and DTS to OFF on the DVDA^CR. Details are on pages 68-69. If you play a DVD when
the settings are wrong, the sound will be distorted or you may damage the speakers.
Connect the antenna or cable to the ANTIN (Antenna In) jack of your DVDAfCFL
2
Connect the red and white audio cables to the red and white DVD/VCR AUDIO OUT Jacks on
the DVD/VCR and to the red and white AUDIO IN jacks on the Stereo, matching the cable colors
to the jack colors.
3
Connect an optional component video cable to the COMPONENT VIDEO OUT jacks on the
DVD/VCR and to the COMPONENT VI DEO IN jacks on the TV.
4
Plug in the Stereo’s power cord.Turn on the Stereo and select the Stereo’s Auxiliary IN station.
During Disc playback, you will adjust the volume at your Stereo. See your Stereo owner’s manual for details.
5
Plug in the TV’s power cord.Turn on the TV and set it to the Component Video In channel, which
usually is located near channel 00. During Audio CD playback, you may check the status of Audio CDs on
your TV screen. During DVD playback, you will watch the program on the TV See your TV owners manual for
details.
6
Connect the DVD/VCR’s power cord to a power outlet. Press the POWER button, then press the
DVD/VCR OUTPUT button so that the DVD light appears on the DVD/VCR. “HELLO” will appear
briefly on the DVD/VCR’s display panel. You should see the DVD logo on the TV screen briefly. If you do not,
check your connections and make sure the TV is set to the correct Component Video In channel. If there is no
disc in the DVD/VCR, "no DISC” will appear on the display panel.