Philips DV900VHS0I - Manual (Page 23)

On-Screen Stotus Displays (VCR) 23
A status display will appear when you press the
DISPLAY/STATUS/EXIT button or certain function buttons.The con­
tents of the status display will vary. To choose the status display
mode, follow the steps below.
• Before you begin, place the DVDA^CR in VCR mode. Press the
DVDAfCR OUTPUT button so that the green VCR light appears
on the front of the DVD/VCR. Press theVCR/TV button so that
theVCR/TV light appears on the front of the DVD/VCR.
If you select STATUS ON, then select COUNTER ONLY
ON:
if Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. After five seconds, only
the counter will remain on the screen.You must press the DtS-
PLAY/STATUS/EXIT button to remove it. Portions of the status
display also may appear when you press other function buttons.
If you select STATUS ON, then select COUNTER ONLY
OFF:
• Whenever you press the STOP button or the PLAY button, the
status display will appear for five seconds. Portions of the status
display also may appear when you press other function buttons.
If you^elect STATUS OFF:
The status display will not appear when you press function but-
tons.You must press the DISPAY/STATUS/EXIT button to see the
status display.
Receiving and Recording Mode
Current status
of tape
STOP
TV STEREO ■
Channel
Time
12:00 AM
OHIO —
STEREO
2NDAUD'
^LP M l:23:'(5 HIFI
Tape
Speed
I
Press the MENU button.
Counter Audio Out Mode
and
Counter
Memory MTS -----------------------
Broadcast
Available
2
Press the PLAY button or the STOP button to select VCR
SET UP, then press the F.FWD button.
3
Press the PLAY button or the STOP button to select ON
SCREEN MODE, then press the F.FWD button.
4
Press the PLAY button or the STOP button to select STA­
TUS, then press the F.FWD button so that OFF (or ON)
appears beside STATUS.
SELECT AT CHOOSE«
-i STATUS
COUNTER ONLY
TO END PUSH EXIT
[ON]
[OFF]
5
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY button or the STOP button to select
COUNTER ONLY, then press the F.FWD button so that
OFF (or ON) appears beside it.
6
Press the DISPLAY/STATUS/EXIT button.
Helpful Hints
You may not access a status display
when viewing a still picture, during
slow motion playback, or during for­
ward or reverse searching.
The status display may not appear if
a weak channel is selected and
BLUE BACKGROUND is set to OFF.
Details are on page 49._________