Sound controls, Analyzer - spectrum analyzer, Dbb - dynamic bass boost – Philips FW620C User Manual
Page 9: Pop/rock/classic/jazz, I'-iss p-iss 3-jiss orr-sss i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SOUND CONTROLS
Switchable "OPTIMAL-USER" sound presets
• By repeatedly pressing OPTIMAL-USER, the display shows the
different equalizer settings:
□PTIflRL-^SER hilSER P-T]PTiriHL-...
OPTIMAL*
This equalizer setting is specially tuned to the
acoustics of the supplied LSB 620 speakers.
USER 1 / USER 2:
Here you have the possibility to set your
individual sound or to listen to your own equalizer setting.
to
"S
c
LU
[ANALYZER - Spectrum Analyzer
The graph bars in the center of the display show the sound levels.
The spectrum analyzer shows continuously the actual frequency
distribution of the current sound.
' By pressing the ANALYZER button,
the spectrum analyzer bars are either
hidden or shown.
-►The display shows either
RNRL'JZEIR OrPorRNPLyZER ON.
Note: When switching on the system, the spectrum analyzer is
always switched on.
DBB - Dynamic Bass Boost
The bass response can be enhanced in 3 steps; every time you
press the DBB button, the bass is enhanced even stronger or the
DBB feature is switched off.
-►The display shows the selected DBB level:
m
I'-iss p-iss 3-Jiss orr-sss i-*...
POP/ROCK/CLASSIC/JAZZ
• Press POP, ROCK, CLASSIC or JAZZ (or DSC on the remote control)
to enhance the type of music you are listening to.
-► In the display the belonging icon lights up.
A realistic atmosphere for the selected style of music is
created.
USfff
1/USER 2
Setting the equalizer
1 Press OPTIMAL-USER several
times until the display shows
USER i or LIBER P.
-►The display function buttons
light up and flash for seven
seconds.
2
Use the display buttons
T A
and -<◄ »to adjust
-bass (left two bars),
-middle tones (middle three bars) and
-treble (right two bars).
-►The graph bars change according to your settings.
-► If no button is pressed for 90 seconds, the sound setting mode
is left automatically and the last changes are stored in the
memory.
3 You can also leave the sound setting mode by pressing
OPTIMAL-USER again.
-►The new sound setting is stored.
Note: From the moment the buttons^ A and« » light up,
you have got seven seconds to start adjusting the sound. If non of
these buttons are pressed within seven seconds, the sound setting
mode is left again.