Philips FW620C - Manual (Page 13)

CD CHANGER
REPEAT - repeating a track, a CD or all CDs SHUFFLE - playing in random order
1 Press REPEAT on the unit several times until the desired option is
displayed;
REPEAT: The current track is played repeatedly.
REPEAT ALL; The entire CD (or program) is played repeatedly.
REPEAT ALL DISCS: All loaded CDs are played repeatedly.
-► During play: The selected repeating mode is automatically
executed.
-► In the stop position: press ► to start CD play.
2 To return to normal CD play, press REPEAT until all related
indications (f?EPERT RLL DIBIIS) disappear from the display.
1 Press SHUFFLE on the unit (or on the remote control) several times
until the desired option is displayed:
SHUFFLE: All tracks of the current CD are played in random order.
SHUFFLE ALL DISCS: All tracks of all loaded CDs are played in
random order.
-► The selected shuffle mode is automatically executed.
2 To return to normal CD play, press SHUFFLE on the unit (or on the
remote control).
Note: You can combine some of the REPEAT and SHUFFLE features
at the same time and for example repeatediy piay the entire CD or
program in random order (SHUFFLE REPEAT ALL).
w
"5»
s
LU
Programming track numbers
You may select a number of tracks and store these in the memory
in the desired sequence. You may store any track more than once.
At most, 40 tracks can be stored in the memory. The display will
show the message TULL, if you exceed the maximum of 40 tracks.
1 Press PROGRAM to enter the CD programming mode.
-> The available display button functions light up and
PROGRAM starts flashing;
) , CUM
^ PtMUM
)
PMMAM
) wim
2 Select the desired CD by pressing the appropriate digit button 1 - 7
(or DISC on the remote control).
3 Select the desired track by pressing with or^w (orMorW or
0-9 on the remote control).
TRACK
Reviewing your settings
• You can review your
settings by pressing REVIEW.
-► The display shows in sequence
all stored track numbers and
the corresponding CD.
During CD play only the tracks
that still have to be played are shown on the display.
Note: If you press REVIEW when no program is available, the
message Uu PRUBRntl will appear on the display.
Clearing the entire program (in the stop position)
• Press CLEAR to clear the program.
On the display PR( j GRF! m [
flag PROGRAM disappears.
-ERREU briefly lights up and the
Note: The program will also be cleared if you interrupt the power
suppiy.
4 As soon as the desired track is displayed, press PROGRAM to store
the track.
-► The display shows the total number of stored tracks, followed
by the just stored track number. PROG behind the track
number indicates, this track number is stored.
5 Select and store in this way all desired tracks.
6 Quit the CD programming mode by pressing ■ (or STOP ■ on the
remote control) or
immediately start playback of the program by pressing ► or
SHUFFLE (or PLAY ► or SHUFFLE on the remote control).
Clearing a track from a program
1 Press PROGRAM to enter the CD programming mode.
2 Select the track to be cleared by pressing r« or^« («◄ or^w on
the remote control).
3 As soon as the number you wish
to clear is displayed, press CLEAR.
-► The cleared track number and
CLERR appear briefly.
Notes:
- You will clear all tracks of one specific CD by opening the CD tray
when this CD is ioaded.
- You can aiso clear one particular track number during the
program review: the currently displayed track number will be
cleared when you press CLEAR.
13