Selecting another source during cd play, Cd changer, Inserting the cds m – Philips FW620C User Manual
Page 12: Playing a cd, Time of cd-elapsed time of current track, Selecting another track, Searching for a passage during cd play, Record tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/679970/12/background.png)
CD CHANGER
Inserting the CDs
m
3
m
'
ST
1
Press CD on the unit or on the remote control.
-►me appears briefly on the display. If there is no CD in the CD
tray, the display will showWu UISC.
The available display button functions light up:
___
___ ________ lewtcTruv _________ ________
FW
650
C (fQ)
2 Press OPEN-CLOSE on the unit to open the CD tray.
-► The display shows uPEN.
3 Insert a CD, printed side up.
4 Close the tray by pressing OPEN-CLDSE.
-► The display shows PEHoJING and thereafter the total number
of tracks and the total playing time. An oval around the tray
number (1-7) indicates when a tray is loaded.
5
To load another CD, press the desired digit button 1 - 7 (or DISC on
the remote control).
-►The CD tray opens automatically when there is no CD inserted.
Notes: - Do not load more than one CD into the sanfie tray.
- The tray will also close If you press ►, any digit button 1 -7, or
SHUFFLE or gently push against the CD tray
Playing a CD
1
Press
►
(or PLAY ► on the remote control) to start playback of the
entire CD.
-► Playback starts with the first track of the selected CD. The
display shows the current track number and its elapsed playing
time. The playing CD is indicated by a rotating red circle.
-►When all the tracks of all CDs have been played, the CD player
stops and the total number of tracks and total playing time of
the last played CD are shown on the display.
2 To stop CD play, press ■ (or STOP ■ on the remote control)
• If you want to select the CD to start playback with, press the
desired digit button 1 - 7 (or DISC on the remote control).
-► Playback starts automatically if the selected tray is loaded.
•
• You can interrupt CD play by pressing
II
on the unit (or PAUSE
II
on
the remote control). Continue CD play by pressing ► (or PLAY ► on
the remote control).
• During play, the display normally shows the elapsed playing time of
the track currently played. You can change the type of the time
information, by repeatedly pressing DISPLAY MODE on the unit:
-► The display shows in turn: remaining
time
of
current
track
-
remaining
TIME OF CD-ELAPSED TIME OF CURRENT TRACK-...
Notes:
- You can also start CD play by selecting a track with the buttons
.0-9 on the remote control.
- CD play also stops If you press OPEN-CLOSE or select another
sound source.
- The system will switch off automatically, if no button is pressed
for more than 15 minutes after CD play has finished.
Selecting another track
• Briefly press or^« once/several times to skip to the beginning
of the current/previous or subsequent track (on the remote control
use the buttons M or W or 0-9).
-► The display shows the selected track number.
-► During play: CD play continues automatically with the selected
track.
-► In the stop position: press ► to start CD play.
Searching for a passage during CD play
1 Hold down F« or^w (or-«or^>- on the remote control) to find a
particular passage in the forward or backward direction.
-► The volume is automatically reduced to a low level.
2 Release the button when you have reached the desired passage.
Note: In the shuffle mode and when playing a program, searching
is only possible within the playing track.
Selecting another source during CD play
You can select another sound source during CD play. If you select
the CD source again, the CD player will return to the original mode:
PLAY, SHUFFLE, REPEAT or PROGRAM.
-► CD play will resume at the position where it was interrupted.
Note: CD play cannot be resumed if the unit has been switched to
standby in the meantime.
RECORD TAPE (
1
As soon as you press RECORD TAPE •, the current CD-sound will
be recorded on TAPE 2, provided a tape suitable for recording is
loaded.
2 To stop recording and CD play, press ■ (or STOP ■ on the remote
control). If you only want to stop recording, press TAPE 2 first, and
then press ■.
12