Philips - MX3950D - Manual (Page 38)

Sound and Volume Controls
Sound Control
IMPORTANT!
For proper surround sound, make sure
the speakers and subwoofer are
connected (see page 11.)
Press SURROUND (SURR.) to select
MUm-channel, 3D SOUND or STEREO.
'■4 The availability of the various surround sound
modes depends on the number of speakers used
and the sound available on the disc.
The center and surround speakers operate
only when the DVD home cinema system is set
to Multi-channel mode.
'■4- The available output modes for Multi-channel
include: Dolby Digital, DTS (DigitalTheater
Systems) Surround, Dolby Surround and Dolby
Pro Logic.
Stereo broadcasts or recordings will produce
some surround channel effects when played in a
surround mode. However; monaural (single
channel sound) sources will not produce any
sound from the surround speakers,
Note;
- You ure not abie to select the surround sound
mode if the system menu/menu bar is turned on.
You can enhance the center and surround sound
outputs by activating the clean voice sound
feature if you have selected Multi-channei as the
surround mode.
Press VOICE on the remote to select'ILfRf?
LdLE LM,
To turn off the setting, press VOICE again to
select"LLLRR VulLL uFT"."
.......................................................................
The BASS (low tone) and TREBLE (high tone)
features enable you to define the sound­
processor settings.
Press BASS or TREBLE
"4 The level indicator appears.
‘ Within five seconds, use the VOLUME control
to adjust the Bass onTreble level (-3 to 3.)
If the volume control is not used within five
seconds, It will resume its normal volume
control function.
Select a preset digital sound effects that matches
your disc's content or that optimizes the sound
of the musical style you are playing.
Press SOUND on the remote.
When playing movie discs or while inTV/AV
mode, you can select:
CONCERT. DRAMA.ACTION or SCl-FI.
When playing music discs or while inTUNER or
AUX/D] mode, you can select: ROCK.
DIGITAL CLASSIC or JAZZ.
Volume control
Adjust VOLUME control (or press
VOL +/ on the remote) to increase or
decrease the volume level.
'VOL I'lIR" is the minimum volume level and
't'OL RH'V’isthe maximum volume level,
To listen through the headphones
Connect the headphones plug to the socket
at the front of the DVD system.
"4- The speakers will be muted.
Press SUB -f/- on the remote to adjust
subwoofer volume level (-6dB to Y6dB.)
To turn off the volume temporarily
Press MUTE on the remote.
Playback will continue without sound and
"Tu fiE” appears.
To restore the volume, press MUTE again or
increase the volume level.
38
pg 001-044_MX39-37-Eng1 2/25/03, 9:59 AM
3139 115 21993