Step 3: setting the tv, To remove the menu, Getting started – Philips - MX3950D User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
©
Step 3:
Setting the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See pages 12-13
“Connecting TV”.)
Adjust
SOURCE
control until "J
j
ISC
appears on the display panel (or press
DISC/MEDIA
on the remote.)
Turn on thcTV and set to the correct video-m
channel. You should see the blue Philips DVD
background screen on theTV.
Usually this channel is between the lowest
and highest channels and may be called FRONT
A/V IN, or VIDEO. See yourTV manual for more
details.
On you may go to channel 1 on yourTV, then
press the Channel down button repeatedly until
you see theVidco In channel.
On the TV remote control may have a button
or switch that chooses different video modes.
On set theTV to channel 3 on 4 if you are
using an RF modulator
- m o o
m Press
DISC/MEDIA
on the remote to enter
disc mode.
"4- Make sure no MP3 or picture (KodakJPEG)
disc is in disc tray 1.
Wait until the system finishes reading the
discs before proceeding to next step.
If playback begins, press ■ to stop playback.
© Press and hoid
DISC/MEDIA
on the remote
until
"PAL”
or
"NTSC"
appears on the display
panel.
To change the setting, repeat step ©.
This DVD system is compatible with both
NTSC and PAL In order for a DVD to play on
this DVD system, the color system of the DVD,
theTV and the DVD system should match.
® in disc mode, stop playback and press
SYSTEM
MENU.
O Select m icon and press T.
® Use the joystick (-^ ► A ▼) on the remote to
navigate in the menu.
Move to and press ►.
Move to
‘TV System’
and press
Auto
- Select this if the connected TV is
compatible with both NTSC and PAL (multi
system.) The output format will be in
accordance with the video signal of the disc.
NTSC
- Select this if the connected TV is
NTSC system. It will change the video signal of a
PAL disc (VCD only) and output to NTSC
format.
PAL
- Select this if the connected TV is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format
Select an item and press
OK.
To remove the menu
Press SYSTEM MENU.
pg 001-044_MX39-37-Eng1
2/25/03, 10:28 AM
19
3139 115 21993