Philips - MX3950D - Manual (Page 25)

Disc Operations
Press then use the numeric keypad
(0-9) to enter the disc number
"IflbL 'i" appears.
Press ►►l.then use the numeric keypad
(0-9) to enter the track number
appears.
Press OK to store the track.
Repeat steps ^
tracks,
^ to select other discs and
Press ► II to start program playback.
"4 Only the tracks programmed from audio
CDs and VCDs will play
Press ■ to stop playback or exit program
mode.
Notes;
- Pressing OPEN* CLOSE bution of the
progrommed disc troy wiH erase the programme.
- if you do not press any buttons wUhsn 20
seconds, the system will exit programm/ng mode,
Stop playback,then press and hold ■ .
'■4' i»ROCj disappears from the display panel and
"F'EGGERri l LEFEEI j " appears.
Note;
- If the DVD system is disconnected from the
power supply, the program will be erased
Using the menu bar to program
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.
(See pa ge 19
“Setting theTV*h)
o o
d?
PROGRAM
i f ■ ■ ■;
-4!!i::liiiiiiiiiiiiiiiii^
_6______ ^
DISC TRACK
Stop playback.then press SYSTEM MENU.
"4 The menu bar will appear across the top of
theTV screen.
Use the joystick ►) to select M and press ▼
to enter the program menu.
Use the joystick (-^ ► A T) to move within the
program menu and use the numeric keypad
(0-9) to enter the disc and track number to be
programmed.
Press ► II to start program playback.
Only the tracks programmed from audio
CDs and VCDs will play
During playback, press PROG on the front
panel to toggle between program on and off.
To clear the program
Stop playback, then press and hold ■ .
pg 001-044_MX39-37-Eng1 2/25/03, 9:58 AM
25
3139 115 21993