Pcm output, Dvd menu options – Philips - MX3950D User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DVD Menu Options

Set Digital Output according to your optional

audio equipment connections.

Follow the steps of''Using

the Setup Menu”

and

select:

H ^ Digital Output

Off

Select this to deactivate the digital output.

Select this If you have connected the digital

output to an optional piece of audio equipment

that has a multichannel decoder

PCM only

Select this If the optional audio equipment is not

capable of decoding multichannei audio. After

that, proceed to

'‘Setting the PCM output.”

Set your PCM (Pulse Code Modulation) outpiit

only after you have set the systems Digital

Output to

‘PCM only.’

(Sec

“Setting the digital

output”.)

Follow the steps

of“Using the Setup Menu”

and

select:

PCM Output

48 kHz

Select this if the optional audio equipment is

incapable of processing 96 kHz digital signal

input, The signal will then be converted to a

standard signal with sampling rates of 48 kHz.

96 kHz

Select this if the optional audio equipment is

capable of processing digital signal input with

sampling rates of 96 kHz. However Tthe sound

output is distorted or there is no sound, select

'48 kHz' instead.

001-044_MX39-37-Eng1

2/25/03, 9:58 AM

3139 115 21993