beautypg.com

Icr-100x 9, Introduction – IC Realtime 480TVL Super Night Vision Outdoor AF 22X Zoom Camera (ICR200X) User Manual

Page 7

background image

Speed Dome Camera Instruction Manual

9/57

z

MAX. 8 sets of Group are programmable. This function is that the camera memorizes

the combination of Presets, Pattern and/or Swings sequently and runs Presets, Pattern

and/or Swings repetitively. A Group can be combined upto 20 functions with any of

Preset/Pattern/Swing.

z

MAX. 4 Privacy Masks are programmable, not to intrude on any other’s privacy.

‰

PTZ(Pan/Tilt/Zoom) Control

z

With the RS-485 communication connection, MAX. 255 units of cameras can be

connected to a single controller.

z

Pelco-D or Pelco-P protocols can be selected as a control protocol in the current

firmware version.

‰

OSD(On Screen Display) Menu

z

OSD menu is provided to display the status of camera and to configure the functions

interactively.

z

The information such as Camera ID, Pan/Tilt Angle, Direction, Alarm Input and Preset

is displayed on screen.

‰

Alarm In/Out Function(Only for the models which have I/O function)

z

3 alarm sensor inputs and 1 alarm sensor outputs are available.

z

Alarm sensor input is decoupled with photo-couplers to avoid external electric noise

and shock perfectly.

z

Both of N.O.(Normal Open) sensors and N.C.(Normal Close) sensors can be used and

the signal range of the sensor input is from DC 5.0V to 12.0V for various applications.

z

The camera can be set to move to a Preset position or to run functions such as Pattern,

Swing and Group when there are external sensor activations. Also “Post Alarm”

function is possible, which is supposed to activate after user-defined time period and

sequentially in succession to the action by external sensor activations.


‰

Reserved Presets(Hot Keys)

z

Most camera setup options can be set up easily and directly with the reserved presets

(Hot Keys), without entering into OSD menu. For more information, refer to “Reserved

Presets(Hot Keys)” in this manual.


‰

Network Function(Only for the IP addressable models)

z

Network functions including remote monitoring, bidirectional audio and others are

available through IP based network such as LAN, ADSL/VDSL, and Wireless LAN. For

more information, refer to the separated manual for IP Addressable models.


‰

Perfect Outdoor Environment Compatibility and Easy Installation

z

The fans and heaters are built-in in the camera for cold and hot temperature

environment. Also idealistic mechanical design protects the camera from water and

dust. (IP66 when installed properly with wall mount bracket only / Only for outdoor

models)

z

It is easy to install and repair the camera.

INTRODUCTION

1

This manual is related to the following products: