IC Realtime 480TVL Super Night Vision Outdoor AF 22X Zoom Camera (ICR200X) - Manual (Page 10)

Speed Dome Camera Instruction Manual 13/57
Main Part Description
Mounting Hook
DIP Switch
Reset Switch (IP Model)
LAN Port (IP Model)
Audio Port (IP Model)
Main Connector
Sensor I/O Port (I/O Model)
Dome Cover
Mounting Screw Hole
z Dome Cover Do not detach the protection vinyl from the dome cover before
finishing all the installation process to protect the dome cover from
scratches or dust.
z DIP Switch Used to set up camera IDs and protocols.
z Mounting Hook Used to assemble the main body with wall mount bracket or
ceiling mount bracket. Insert the mounting hooks into the holes on
the surface of the main body and turn the main body.
z Mounting Screw Hole Used to assemble the main body with a bracket with screws.
z Main Connector Used for the power wire, the video cable and the RS-485
communication cable connection.
z Sensor I/O Port Used for the sensor in/out connection. (The sensor I/O function
possible models only)
z LAN Port Used for the Ethernet connection. (IP addressable models only)
z Audio Port Used for the audio in/out connection. (IP addressable models only)
z Reset Switch Used to initialize all the network configurations to the factory
default. (IP addressable models only) Press the button for more
than 5 seconds to initialize the network system.
INTRODUCTION
1