IC Realtime 480TVL Super Night Vision Outdoor AF 22X Zoom Camera (ICR200X) - Manual (Page 15)

Speed Dome Camera Instruction Manual 20/57
③ Connect the wires and cables to the ports
and install the main body. (Machine M3×8)
④ Align the dome cover stud with the dome
cover assembly stud and slightly push the
dome cover to the ceiling. Turn the dome
cover clockwise and screw on the dome
cover lock-up screw. Then remove the
protection vinyl from the dome cover.
(Machine M3×6)
Important Notice
z
Before starting the installation, make sure that the Camera ID and Protocol are set up properly.
z When the pipe hole for wiring and cabling on side of the Surface Mount Bracket is not used, make sure
that the hole is properly sealed with the supplied Hole Plug.
z To adjust the installation height from the mounting surface, the pipe and coupler should be needed
between the surface mount part of the ceiling mount bracket and the camera mount part of the ceiling
mount bracket. Note that they are not supplied by the manufacturer.
INSTALLATION
2