IC Realtime 480TVL Super Night Vision Outdoor AF 22X Zoom Camera (ICR200X) - Manual (Page 38)

Speed Dome Camera Instruction Manual 46/57
‰
Preset Scene Setup
EDIT SCENE - PRESET 1
------------------------
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]
‰ Preset Label Setup
EDIT LABEL - PRESET 1
------------------------
[ ]
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
○ 1 Use the Joystick to move the camera to a desired
position.
○ 2 Save the preset position by pressing NEAR key.
○ 3 Press FAR key to cancel targeting the preset position.
Edit the label of the selected preset to show on the
monitor when camera arrives at the preset. In the Edit
Label menu, the dark rectangular is the cursor. As soon as
finishing selecting an alphabet or a number, the cursor
moves to the next digit.
① With Left/Right/Up/Down of the joystick, move to a
desired Alphabet or a desired number in the
Alphanumeric set. To select a desired Alphabet or a
desired number, press the NEAR key.
If you want to use a blank, select the double quotation
mark (" "). If you want to delete an Alphabet or a
number, use the back space character (" ←").
② If you complete the Label editing, move the cursor to
"OK" and press the NEAR key to save the completed
label. To abort the current change, move the cursor to
"Cancel" and press the NEAR key.
OSD MENU
4
Current Cursor Position
[ ]
Back Space Char. Space Char.
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------