IC Realtime 480TVL Super Night Vision Outdoor AF 22X Zoom Camera (ICR200X) - Manual (Page 37)

Speed Dome Camera Instruction Manual 45/57
Preset Setup
PRESET SETUP
------------------------
PRESET NO. 1
CLR PRESET CANCEL
LABEL123
RELAY OUT OFF
CAM ADJUST GLOBAL
BACK
EXIT
z Preset
Number
[1~128]
Selects a preset number to set up. If a
selected preset is already defined, the
camera moves to the pre-defined position
and preset parameters such as Label and
CAM Adjust show on the monitor. If a
selected preset is not defined,
“UNDEFINED” shows on the monitor.
z Clear
Preset
[CANCEL/OK]
Deletes the data of the selected Preset.
z Edit
Preset Scene
Re-defines the scene position of the
selected Preset.
z Edit
Preset Label
Edits the label of the selected Preset to
show on the monitor when the preset runs.
MAX. 10 alphanuberic characteristics are
allowed.
z Relay Out Defines the relay output.
z CAM Adjust [GLOBAL/LOCAL]
WB(White Balance) and AE(Auto
Exposure) can be set up independently for
each preset. There are 2 modes, "Global"
mode & "Local" mode. The Global mode is
that WB and/or AE are/is set up totally and
simultaneously for all presets. The Global
parameter setup such as WB and AE can
be done in "ZOOM CAMERA SETUP" menu.
The Local mode is that WB and/or AE
are/is set up independently or separately
for each preset. The Local parameter setup
for WB and AE can be done in each preset
setup menu. Each Local parameter such as
WB and AE activates correspondingly
when the camera arrives at each preset
position. During jog operation, Global
WB/AE value should be applied. All Local
WB/AE values do not change although
Global WB/AE value changes. The Local
mode has the prior to the Global mode.
OSD MENU
4