IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 44)

44
1. Move the camera to the desired PAN/TILT/ZOOM location using the Joystick.
2. Press No. 1 on the keyboard
3. Press and hold the F1 Key until “SETTED” appears in the bottom right on the screen.
Caution
When using the shortcut key to set PRESETS, they can be in the range 1-64. With regard to PRESETS
of 65 and over, these should be set up using the OSD Menu.
WTX-1200A – Simple PRESET Shift
Press the PRESET number followed by the F1 key and the camera moves to the corresponding
PRESET position. However, this is only valid up to PRESET no. 32 for which PRESET DEFINE is set
to ON.
WTX-1200A - Simple TOUR Operation
Press number 71 on the keypad followed by the F1 key. This works when TOUR DEFINE is ON and
the TOUR related MENU is properly set up.
WTX-1200A- Simple PATTERN Operation
Press number 66 on the keypad followed by the F1 key. This works when PATTERN DEFINE is ON
and the PATTERN related MENU is properly set up.
WTX-1200A - Simple SCAN Operation