IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 34)

34
• PRESET NO
A total of 128 presets can be set up.
Changing the PRESET NO is achieved by using the LEFT and RIGHT keys.
• PRESET DEFINE
OFF: PRESET doesn’t work
ON: Applicable PRESET is useable.
Changing the location for PAN/TILT/ZOOM in PRESET is as follows.
1. After PRESET DEFINE is changed from OFF to ON, press the IRIS OPEN KEY
2. Use PAN and TILT to move to the desired location.
3. To ZOOM in on the location, use the TELE or WIDE button on the controller.
4. Finalise the PAN, TILT and ZOOM settings by pressing the IRIS CLOSE KEY.
Tip: Shortcut
To change focus mode in ‘Preset’ setting use the shortcut keys shown below.
67+GO PRESET: AUTO
68+GO PRESET: MANUAL
• PRESET NAME
OFF ] When using a PRESET, the PRESET name is not displayed on the screen.
ON ] When using a PRESET, the PRESET name is displayed on the screen.
Default for PRESET name is PRESET001 and the editing method is as follows:
1. After changing a PRESET NAME from OFF to ON press the IRIS OPEN KEY.
2. Editing a PRESET NAME is the same as shown in section “1.3 CAMERA NAME DISPLAY”.
• FOCUS IN BW
Focus is adjusted as set in the FOCUS/ZOOM menu in Colour mode.
In a B/W environment (IR is activated), the focus is adjusted as set in FOCUS IN BW
If “AF LIMIT” in FOCUS/ZOOM menu is ON, and over 20x Zoom ratio, FOCUS MODE
changes to MANUAL.
If OFF, the focus is adjusted as set in FOCUS IN BW.
PRESET NAME PRESET0001
PAN XXX
TILT XXX
ZOOM TELE / WIDE
EXIT IRIS CLOSE