IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 36)

36
TOUR will be executed in programmed preset 1, 3 & 5.
The method for setting TOUR GROUP 1 in PRESET is as follows:
1. Register “1” as a TOUR NO.
2. Change the status of TOUR NO DEF from OFF to ON and press the IRIS OPEN KEY.
3. Input the desired PRESET number from 1 onward in sequential order.
4. Press the IRIS CLOSE KEY to finalise the setting.
• NAME
Change the name of a TOUR GROUP.
The method for changing the name is as follows:
1. First change TOUR NAME DEF from OFF to ON, then press the IRIS OPEN KEY.
2. Changing a Tour Group name uses the same method shown in “1.3 CAMERA NAME
DISPLAY”.
• DWELL TIME
Is the waiting time between a PRESET execution and moving to the next PRESET.
Caution
If TOUR GOURP1 PRESET is set up as follows.
After moving through PRESET1 > PRESET2 > PRESET3, the camera returns to PRESET1.
If any PRESET is “OFF” during an operation in serial order, the camera returns to the first preset.
PRESET NUMBER OFF / 1~128
PRESET NUMBER OFF / 1~128
PRESET NUMBER OFF / 1~128
PRESET NUMBER OFF / 1~128
PRESET NUMBER OFF / 1~128
EXIT
PRESET NUMBER 1
PRESET NUMBER 2
PRESET NUMBER 3
PRESET NUMBER OFF
PRESET NUMBER 4
EXIT