IC Realtime The Sentinal WDR 36x Optical Zoom, 32x Digital Zoom IR PTZ Camera - Manual (Page 41)

41
• HEIGHT EDIT
Adjust the height of ZONE.
• HEIGHT EDIT
Adjust the width of ZONE.
• PAN ANGLE
Move a setting ZONE from side to side.
• PAN ANGLE
Move a setting ZONE up and down.
How to set up PRIVACY ZONE 1
1. When the MENU is OFF, locate the PRIVACY ZONE block in the centre of the screen using the
PAN/TILT function.
2. Press the IRIS OPEN KEY to activate the MENU and move to “ZONE SET”. Then, press the IRIS
OPEN KEY again.
3. Change AREA SEL to 1.
4. Change AREA DEFINE from OFF to ON.
5. Change AREA NEW SET from OFF to ON.
6. New ZONE is activated in the centre of the screen and the ZONE can be moved using the HEIGHT,
WIDTH, PAN and TILT Menu.
7. Press the IRIS CLOSE KEY to finalise the set up.
Caution
Please set a MASK within -20°~80° of the TILT angle.
If a MASK is set at a TILT angle over 90°, PAN/TILT automatically moves to a position within 90°.
• ALARM DISPLAY
When signals are input from outside, the alarm number is displayed on the monitor.
5. ALARM SET
1. ALARM DISPLAY OFF/ON
2. ALARM IN SET
3. ALARM OUT OFF/ON
4. TIME OUT 1~10sec
5. EXIT