IC Realtime PTZ-2801WDR: High Speed PTZ Dome Camera with 28X Zoom User Manual
Page 23
23
Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third
submenu. Please use the left/right button on the keyboard or in the speed dome terminal menu
to set. After completed setup, please click save button to save current setup.
z
PRESET TITLE: Display dome preset title or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set. You can go to Function Setup->Preset
section to set corresponding preset value and preset title.
z
AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set
z
TIME DISP: Display dome system time or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
POSITION: Display the angel between the benchmark and then current location. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
z
ZOOM DISP: Display speed dome zoom speed or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options:
℃/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
z
OUTSIDE TEMPERATURE AND HUMIDITY: Display dome external temperature and
humidity. There are three options:
℃/F/Off. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
z
IDLE TIME: The option includes close/1/2/3/4/5min. The system will exit the menu
automatically once there is no menu operation during the time you specify here. Close
means always show the menu.
z
BACK: Go back to the previous menu.
z
EXIT: Log out system menu.
4.4.3 Camera
Setting
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the
submenu.
z
WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button,
you can go to the third menu.
z
EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you
can go to the third menu.
z
DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm
button, you can go to the third menu. There are three options: auto/manual/off. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS MODE ：AUTO
FOCUS LIMIT : 30CM
ZOOM SPEED : 08
DIGITAL ZOOM : OFF
APERTURE : 09
NEXT PAGE
BACK
EXIT