IC Realtime 4/8/16/32 Channel 2U Network Video Recorder - Manual (Page 95)

86
8 Web Operation
8.1 General Introduction
The device web provides channel monitor menu tree, search, alarm setup, system setup, PTZ
control and monitor window.
Important
The following operation is based on 16-channel series device.
8.1.1 Preparation
Before log in, please make sure:
z
Network connection is right
z NVR and PC network setup is right. Please refer to network setup(main
menu->setting->network)
z Use order ping ***.***.***.***(* NVR IP address) to check connection is OK or not. Usually the
return TTL value should be less than 255.
z Open the IE and then input NVR IP address.
z System can automatically download latest web control and the new version can overwrite the
previous one.
z If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to
C:\Program Files\webrec to remove single folder. Please note, before you un-install, please
close all web pages, otherwise the un-installation might result in error.
z Current series product supports various browsers such as Safari, firebox browser, Google
browser. Device only support 1-channel monitor on the Apple PC.
8.1.2 Log
in
Open the IE and then input the NVR IP address in the address column.
For example, if your NVR IP address is 192.168.1.108, then please input http:// 192.168.1.108 in
IE address column. See Figure 8-1.
Figure 8-1 IE Interface
Input IP
address here.