IC Realtime 4/8/16/32 Channel 2U Network Video Recorder - Manual (Page 118)

109
Figure 8-34 NAS Setup
Please refer to the following sheet for detailed information.
Parameter Function
NAS enable Please select network storage protocol and then enable
NAS function. The network storage protocol includes
FTP.
Server IP Input remote storage server IP address.
Port
Input Remote storage server port number.
User Name Log in user account.
File length The max files length when you transfer the file. When
the input value is 0, then system upload the whole files.
Password The password you need to login the server.
Remote Path Remote storage file path.
Channel
Select a monitor channel .
Period
info.
Setup
z In NAS interface, click set button, you can go to the
corresponding setup interface. See Figure 8-34.
z .Please set schedule period and then select
corresponding record type: schedule/alarm. Please
note device does not support motion detect record
function now.
z Please select date (Current setup applies to current
day by default. You can draw a circle before the
week to apply the setup to the whole week.)
z
After complete setup, please go back to Figure 7-28
and then click save to save current time period
setup.
Copy User can use this shortcut to copy the storage state of a
channel to another (or all other channels)
NTP
The NTP interface is shown as in Figure 8-35.