IC Realtime 4/8/16/32 Channel 2U Network Video Recorder User Manual

Page 66

Figure 6-51

2) The proxy server software developed from the SDK. Please open the software and input the
global setup. Please make sure the auto connection port here is the same as the port you set in
the previous step.
3) Now you can add device. Please do not input default port number such as the TCP port in the
mapping port number. The device ID here shall be the same with the ID you input in Figure 6-51.
Click Add button to complete the setup.
4) Now you can boot up the proxy server. When you see the network status is Y, it means your
registration is OK. You can view the proxy server when the device is online.
Important
The server IP address can also be domain. But you need to register a domain name before you
run proxy device server.

6.6.6 Alarm

In the main menu, from Setting to Alarm, you can see alarm setup interface. See Figure 6-52.
z

Alarm in: Here is for you to select channel number.

Event type: There are four types. Local input/network input/IPC external/IPC offline alarm.

Local input alarm: The alarm signal system detects from the alarm input port.

Network input alarm: It is the alarm signal from the network.

IPC external alarm: It is the on-off alarm signal from the front-end device and can

activate the local NVR.

IPC offline alarm: Once you select this item, system can generate an alarm when the

front-end IPC disconnects with the local NVR. The alarm can activate record, PTZ, snap
and etc. The alarm can last until the IPC and the NVR connection resumes.

Enable: Please you need to highlight this button to enable current function.

Type: normal open or normal close.

Period: It is to set local alarm period. System only enables local alarm in the specified period.

Click the Set button; you can select the business day and the non-business day. Please note
for the work day/free day setup and the specific work day setup, system just saves the latest
setup. For example, the work day ranges from 8:30-17:30 Monday to Friday, and then you set
the period 7:10-18:00 for Monday. So, the arm period of the Monday ranges from 7:10 to
18:00. Please highlight the corresponding button to enable this function.