IC Realtime 4/8/16/32 Channel 2U Network Video Recorder - Manual (Page 159)

150
• User: Enter your username (email address) created in step 3.
• Password: Enter the password created in step 3.
The figure Configuration file of No-IP is shown as in Figure 14-11.
Figure 14-11
12. Now you have completed device setup. Open Internet Explorer ® in another foreign network
with Internet access, unlike the network where the device is connected to, you need to follow
the steps listed below:
1. Enter the address into your browser: http://nome the field created in step 8. For example:
http://vd16s480st.no-ip.biz
2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser
address as: http://nome the field created in Step 8: port number of HTTP. For example:
http://vd16s480st.no-ip.biz:9090
3. Press Enter. The system will ask install application webrec.cab control or not. Please click
Yes to perform a successful connection.
4. If the page does not appear on the computer screen, you need to lower your system safety
setup. From Tools> Internet Options> Security, select Internet and then click Custom Level,
you can enable ActiveX controls. See Figure 14-12 . Then open your browser and re-enter the
domain name of the device.