2 rear panel – IC Realtime 4/8/16/32 Channel 2U Network Video Recorder User Manual
Page 21

12
Status
indication
light
Status
If there is Fn indication light, current status indication light is
null.
HDD
abnormal
i di ti
HDD
HDD error occurs or HDD capacity is below specified
threshold value, the light becomes red to alert you.
Remote
control
indication
light
ACT
Remote control indication light
Power
indication
light
Power
Power indication light
Record light
1-16
System is recording or not. It becomes on when system is
recording.
For this series product, the last 12 lights are null since there
is only four channels.
IR Receiver
IR
It is to receive the signal from the remote control.
Shuttle(outer
ring)
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise
to backward.
Jog(inner
dial)
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
CD-ROM
button
Pop-up or insert the CD.
2.2 Rear Panel
2.2.1 NVR7XXNS
Series
The rear panel is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
Port Name
Connection Function
USB port.
Connect to USB mouse.
Network port
10M/100M/1000M self-adaptive Ethernet port.
Connect to the network cable.