IC Realtime 4/8/16/32 Channel 2U Network Video Recorder - Manual (Page 158)

149
9. Now you can see an interface is shown as in Figure 14-9. Here you can view domain name
and the computer's current IP setup. If you already have a domain name equal to gurado
trusted, you must define another name for the host.
Figure 14-9
10. Now you need to define the definition of the server's IP in IP-device able to access this service
DDNS. To get DDNS service, you need to have a computer connected to the Internet on the
same network with device. Then please type the command dynupdate. no ping-ip.com at the
command prompt, Windows ®. The server's IP will be displayed on the screen. See Figure
14-10. Your device can use this IP to find the No-IP server.
Figure 14-10
11. Please go to the device and access the MAIN MENU> SETTING> NETWORK> DDNS. Input server IP you
get in the above step. Select the DDNS Type as No-IP DDNS and highlight the icon in front of Enable to
enable the DDNS function. Now fill the fields as described below, and click OK to save current setup.
• Server IP: Enter the IP noted in step 10.
• Port: Enter the port 80.
• Domain Name: Enter the domain name created in step 8.