IC Realtime 4/8 H.264E HD SDI High Definition DVR User Manual

Page 37

Recording
Length

1 to 120 minutes single record duration (Default setup is 60 minutes)

Playback
Repeat Way

When hard disk is full, system can overwrite previous video file.

Record Search Various search engines such as time, type and channel.
Playback
Mode

Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.

Various File
Switch Ways

Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel

Multi-channel
Playback

There is 1/4/9/16-channel playback mode.
(It may vary due to different series.)

Window Zoom Switch between self-adaptive screen/full screen when playback

playback

Partial
Enlargement

When in one-window full-screen playback mode, you can select any
zone to activate partial enlargement function.
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk,
USB burner and etc.)
Support peripheral eSATA backup device.

Backup
function

Backup Mode

Support network download and backup
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output

Network
Function

Network
control

Bidirectional audio.

Motion
Detection

Zone setup: support 396/330((PAL 22×18, NTSC 22×15)) detection
zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message
prompt.

Video Loss

Alarm can activate external alarm or screen message prompt.

External Alarm Support record activation function or activate external alarm or screen

message in specified period.

Manual Alarm
Control

Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.

Motion
Detection and
Alarm

Alarm Input

4-ch alarm
input（You
can set
normal
open or
normal
close type
to select the
alarm
type. ）

8-ch alarm
input（You
can set
normal
open or
normal
close type
to select the
alarm
type. ）

16-ch alarm
input（You
can set
normal
open or
normal
close type
to select the
alarm
type. ）