IC Realtime 4/8 H.264E HD SDI High Definition DVR User Manual
Page 119
109
while the next HDD is no empty, then system stops recording, If the current HDD is full and
then next HDD is not empty, then system overwrites the previous files.
z
Pack duration: Here is for you to specify record duration. The value ranges from 1 to 120
minutes. Default value is 60 minutes.
z
Video standard: There are two formats: NTSC and PAL.
z
Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
z
Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.
z
Device ID: Please input a corresponding device name here.
z
Real-time playback: It is to set playback time you can view in the preview interface (chapter
4.2 Live Viewing). The value ranges from 5 to 60 minutes.
z
Startup wizard: Check the box here, system goes to the startup wizard when the device
boots up the next time. Otherwise, it goes to the system login interface directly.
z
Navigation bar: Check the box here, system displays the navigation bar on the interface.
Note:
Since system time is very important, do not modify time casually unless there is a must!
Before your time modification, please stop record operation first!
After completing all the setups please click save button, system goes back to the previous menu.
Figure 5-3
Figure 5-4