IC Realtime 4/8 H.264E HD SDI High Definition DVR User Manual

Page 24

Playback
Repeat
Way

When hard disk is full, system can overwrite previous video file.

Record
Search

Various search engines such as time, type and channel.

Playback
Mode

Various fast play, slow play speeds, manual frame by frame playback
and reverse play mode.

Various File
Switch
Ways

Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel

Multi-
channel
Playback

There is 1/4-channel
playback mode.

Window
Zoom

Switch between self-adaptive screen/full screen when playback

Partial
Enlargemen
t

When in one-window full-screen playback mode, you can select any zone
to activate partial enlargement function.

HDD backup
Support peripheral USB backup device. (Flash disk, portable disk, USB
burner and etc.)
Support peripheral eSATA backup device.

Backup
function

Backup
Mode

Support network download and backup
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output

Network
Function

Network
control

Bidirectional audio.

Motion
Detection

Zone setup: support 396/330((PAL 22×18, NTSC 22×15)) detection
zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message prompt.

Video Loss Alarm can activate external alarm or screen message prompt.
External
Alarm

Support record activation function or activate external alarm or screen
message in specified period.

Manual
Alarm
Control

Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.

Alarm Input

4-ch alarm input（You
can set normal open
or normal close type to
select the alarm
type. ）

8-ch alarm input（You
can set normal open
or normal close type to
select the alarm
type. ）

16-ch alarm input
（

You can set normal

open or normal close
type to select the
alarm type. ）

Alarm
Output

6-channel relay output, including one controllable DC +12V output port.

Motion
Detection and
Alarm

Alarm Relay 30V DC 2A，125V AC 1A（activation alarm ）
USB
Interface

3 USB 2.0 ports.

Interface

Network
connection

RJ45 10M/100M/1000M self-adaptable Ethernet port