How to use the audio/video input jacks, S-video input, Tiirn the vcr (or digital i video disc player) on – Philips COLOR TV User Manual
Page 3: Press the menu button on, Using the tv volume bar control, Tv v, O o o o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How
TO U
se
the
A
udio
/V
ideo
I
nput
J
acks
S-ViDEO I
nput
The S(uper)-Video connection on
the rear of the television can give
you better picture detail and clar
ity, for the playback of S-VHS
VCR tapes, or Digital Video Discs
than the normal antenna picture
connections.
Note: The accessory device being
used must have a S-Video Output
to complete this connection. The
following steps show the connec
tions to the S-VIDEO and
AUDIO AVI input jacks.
i BEGIN)
<0^ Connect the S-VIDEO
CABLE
to the S-VIDEO input
jack on the rear of the television,
then the AUDIO (red and white)
to the AUDIO AVI (left and right)
jacks on the rear of the TV.
Connect the S-VIDEO
CABLE
to the S-VIDEO output
jack on the accessory device.
Then connect the red and white
AUDIO CABLES to the AUDIO
(left and right) output jacks on the
rear of the accessory device.
Tiirn the VCR (or Digital
I Video Disc Player) ON.
Press the
MENU
button
on
the remote to display the onscreen
menu.
<|> Press the CURSOR UP A or
CURSOR DOWN ■ buttons
until the word INPUT is highlight
ed.
Press the CURSOR RIGHT
^ or CURSOR LEFT ^
button
to display the INPUT menu
(ANTENNA, EXT 1, EXT 2). Use
the CURSOR UP A or DOWN ■
buttons
to select
EXT 1.
Now your ready to use the accesso
ry device with the S-Video outputs.
NOTE: If there is an accessory device plugged into
the S-VIDEO jack and one plugged into the VIDEO
IN-1 jack, the video signal coming from the S-VIDEO
plug will be dominate when tuned to EXT 1 within
the INPUT control.
BACK OF TV
S-VIDEO
CABLE
(NOT SUPPLIED)
BACK OF ACCESSORY
SAP
AVL
ON
ON
1 INPUT
► 1
SLEEPTIMER
OFF
SmartLock
►
DBS, DVD, Video Game, etc.
11-.QUIPPED WITH S-VIDEO AND
.\UDIO OUTPUT JACKS)
c5
O
(X) o”o o
RECORD
TV/VCB
I® ® ®
' (4)
® (6)
® ® (D
26
U
sing
the
TV V
olume
B
ar
C
ontrol
T Tse the Volume Bar control to see
C/ the TVs volume level settings
on the TV screen. The Volume Bar
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed.
C BEGIN)
Press the MENU button
to dis-
I play the onscreen menu.
<|> Press the CURSOR UP ^ or
CURSOR DOWN ■ buttons
until
the word
VOLUME
is highlighted.
Press the CURSOR RIGHT
button
to increase the TV’s vol
ume or the
CURSOR LEFT
button
to decrease the sound.
OONTRAST PLUS
NOISE REDUCTION
ON
ON
1 VOLUME
■...........
15|
BALANCE
......I......
0
TREBLE
...
30
c5
O
A/CH STATUS/EXIT CC CLOCK
cx o o o
RECORD
TVNCR
" ® @ (I)
'
®
® ®
(7)
® (9)
SWAP SOURCE POSmON FREEZE
o o o o
PIPON/OFF
O
OR
Note: Pressing the VOL
{+)
or (-) buttons will
also allow you to adjust
the sound level of the
TV. A Volume Bar
adjustment will appear
onscreen. Press the (-t)
to increase the volume
and the (-) button to
decrease the volume.
O
O
A/CH STATUS/EXIT CC CLOCK
cx o o o
RECORD
TV/VCR
(2) (3)
® (D ®
® ® ®
(O)
®
CO)
SWAP SOURCE POSITION FREEZE
o o o o
"o
23