Philips COLOR TV - Manual (Page 18)

U sing the R emote ’ s VCR B uttons
using the TV remote
y y with a VCR, first make cer­
tain it is set to control your VCR
(by the REMOTE CODE or
SEARCH method).
{ BEGINl
I
Set the TV/VCR/ACC mode
switch to VCR on the remote.
Point the top of the remote
toward the front of the VCR
(remote sensor window) when
pressing the buttons.
RECORD BUTTON
Hold the (A/CH) • RECORD button
down to begin a VCR recording.
VCR SYSTEM SWITCH
Set in the VCR position to send
remote commands to the VCR.
PLAY BUTTON ^
Press to begin playback of a
video tape.
REWIND BUTTON
Press to rewind tapes. For some
VCR’s the STOP button may
have to be pressed first, then
REWIND. In playback mode
hold down the button to view
picture moving rapidly in
reverse.
STOP BUTTON ■
Press to stop the motion of a tape
in playback, rewind, fast forward,
etc.
I / S mart H elp
Remember, the VCR but-
i tons on the remote wUl not
operate your VCR if those features
are not found on your VCR remote
control.
Note: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.)
will operate the same as with the orig­
inal VCR remote control provided
with the VCR.
POWER BUTTON
Press to turn the VCR ON and
OFF.
TV/VCR BUTTON
Press while in the VCR mode (VCR
indicator on the front of the unit
will light) to view the playback of a
tape. Press again to place in the TV
position (VCR indicator light will
go off) to view one program while
recording another program.
When used in the TV mode, the
TVA^CR/CLOCK button will
access the TV's Clock menu
options.
NUMBER BUTTON
Press buttons for direct VCR
chaimel selections.
PAUSE BUTTON il
Press to temporarily stop the tape
during a playback or recording.
Press again to release Pause.
FAST FORWARD BUTTON
Press to rapidly advance the tape.
For some VCR’s you may need
to press the STOP button first,
then the FAST FORWARD but­
ton. In playback mode hold the
button down to view the picture
moving rapidly in the forward
direction.
CH ANNEL + & - BUTTONS
Press to scan up or down through
the VCR channel numbers.
U sing the C losed C aption C ontrol
C losed Captioning (CC) allows
you to read the voice content of
television programs on the TV
screen. Designed to help the hear­
ing impaired, this feature uses
onscreen “text boxes’’ to show dia­
logue and conversations while the
TV program is in progress.
i BECINl
<$> Press the MENU button on the
remote to display the onscreen
menu.
<3^ Press the CURSOR UP ► or
CURSOR DOWN ■ button until
the word CC (Closed Caption) is
highlighted.
<|> Press the CURSOR RIGHT
button to select the CLOSED
CAPTION option you want (OFF, 1,
2, or MUTE). Dialogue (and
descriptions) for the action on the
captioned TV program will appear
onscreen.
NOTE: You can also set the
Closed Caption by pressing the CC
button on the remote. When pressed
repeatedly the screen will display the
options:
CC-OFF, CC-1, CC-2, or
CC-MUTE.
S mart H elp
Remember: The onscreen
S menu wiU time out and disap­
pear from the screen when you fin­
ish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CC-1, or CC-2) necessarily being used by a broadcast station during the
transmission of a closed caption program. Refer to your area's TV program listings
for the stations and times of Closed Caption shows.
SmartLock
CLOCK
►
►
ICC OF^
PIP ►
SETUP ►
SmartLock
CLOCK
►
►
icc 1|
PIP ►
SETUP ►
POWER
0
RECORD
CLOCK > o
■©
© ®
© ®i
\0)
^ySOUND
SWAP SOURCE POSITION FREEZE
O O O O
pip owoff o
CAPTION mode
Example Display
NOTE: The CC-MUTE option
can be used to set the TV to
turn the Closed Caption mode
“ON” whenever the MUTE but­
ton on the remote is pressed.
This activates the CC-1 option.
MUTE will appear smaller in
the upper center of the screen.
13