Blocking options, Point the remote control at – Philips COLOR TV User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U
nderstanding
the
S
mart
L
ock
™ C
ontrol
(B
locking
O
ptions
1
S
etting
the
R
emote
C
ontrol
T
o
W
ork
W
ith
O
ther
D
evices
Q^martLock ojfers the viewer other
O blocking features as well. With
these Blocking Option features, the
censoring can be turned ON or
OFF.
tBEGINl
Press the
MENU
button
on the
remote to display the onscreen
menu.
Press the CURSOR UP ^ or
CURSOR DOWN ■ buttons
until
the words
SMART LOCK
are high
lighted.
<|> Press the CURSOR RIGHT
button
to display the
SmartLock Access Code screen.
<|> Using the NUMBERED but
tons
on the remote, enter your per
sonal Access Code.
With the word
BLOCK
high
lighted,
Press the CURSOR
RIGHT ^ button.
Scroll the menu using the
CURSOR UP ^ or CURSOR
DOWN ■ buttons
until the words
BLOCKING OPTIONS
are high
lighted.
INPUT
SLEEPTIMER
►
OFF
[SmartLock
► 1
CLOCK
►
CC
OFF
SmartLock
ACCESS CODE
SmartLock
ACCESS CODE
X X X X
[BLOCKING OPTIONS ►!
CHANNELS BLOCKED ^
MOVIE RATINGS ^
' [BLOCK
► 1
CHANGE CODE
►
[MASTER DISABLE ONI
BLOCK UNRATED
BLOCK NO RATING
ON
ON
OR
[MASTER DISABLE OFF]
BLOCK UNRATED
BLOCK NO RATING
OFF
OFF
CHANNEL 2D BLOCKED
BY CONTENT ADVISORY
CANNOT DECODE RATING
ENTER CODE TO VIEW
If the BLOCK UNRATED or BLOCK NO RATINGS
controls are turned ON, all unrated programs and pro
grams containing NO content advisory data will display
the screen shown to the left. To watch the channel enter
your access code, or change the BLOCK UNRATED
and BLOCK NO RATINGS back to off.
Press the CURSOR RIGHT
button
to display the
Blocking Options (MASTER
DISABLE, BLOCK UNRATED,
or BLOCK NO RATING).
When
highlighted, each feature can be
turned
ON
or
OFF using the
CURSOR RIGHT ^ or CUR
SOR LEFT buttons
on the
remote.
ly
BLOCKING OPTIONS:
MASTER DISABLE:
This is what might be called the “master switch” for SmartLock. When in the ON position, ALL block-
ing/censoring is turned off (or disabled). When in the OFF position, ALL blocking based on specifically blocked settings will
take place.
BLOCK UNRATED:
ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this
feature is set to ON and the MASTER DISABLE feature is set to OFF.
BLOCK NO RATINGS:
ALL programming with NO content advisory data can be blocked if this feature is set to ON and the
MASTER DISABLE feature is set to OFF.
'\Zour remote control is set to
A. work your TV and many
infrared remote (IR) control
VCRs, Cable Boxes, Satellite
Systems, DBS, etc. However, an
easy onetime step may be neces
sary before the remote will work
your VCR.
Try this initial check to see if
going on to the following section
is necessary.
(BEGIN)
Mode Switch
in the proper posi
tion.
Point the remote control
at
the device and press the POWER
button.
Does the remote turn the
device ON?
If
YES, stop and try other func
tion buttons on the remote. If
they also work the device, then
the remote is ready and no fur
ther steps are needed.
If
NO, continue...
First look up a THREE-DIGIT
remote control number
for your
brand of Device before going
through the simple steps on the
following page.
Find your Three-Digit Code on
pages 34-35.
/ S
mart
H
elp
Remember, if more than
8 one number is listed, you may
have to try more than the first Three-
Digit code given in order to locate
your Device’s remote code.
18
31