FingerTec AdapTec-X - Manual (Page 4)

4
UNDERSTANDING THE TECHNICAL SPECIFICATIONS
PHYSICAL APPEARANCE
Surface finishing Acrylonitrile Butadiene Styrene (ABS)
Dimension, mm 85 x 96 x 33
Weight, kg 0.1
CPU High Performance RISC CPU
POWER SUPPLY
Power input 12VDC 3A
Power output 12VDC 3A
Backup Power system UPS or 12VDC Rechargeable battery
INPUT – OUTPUT SIGNAL
Input signal 26-bit FingerTec encrypted Weigand signal
Output signal 12VDC 0.5A Siren
12VDC 3A EM output (NO/NC Type door locks)
ALERTS & NOTIFICATIONS
Over input voltage Yes, 3 long beeps
Door release Yes, 2 short beeps
Door forced open Yes, continuous beeps (May opt to output external siren system)
Illegal dismantling of Yes, continuous beeps (May opt to output external siren
FingerTec terminals system)
Door unlock timer VR type, LED blinks to indicate unlock time in Seconds
On-Board LED indicators EM LED lit up – Door lock output is working
Status LED lit up – CPU is working
Battery low LED lit up – Battery is low and cut-off
ON BOARD PROTECTION
Over voltage alarm >15 VDC
Fuses PTC type
Battery cut-off 8.5 ~ 9.5 VDC
NOTE: Specifications are subject to change. Check http://product.fingertec.com for latest product information.