FingerTec AC100 Plus - Manual (Page 8)

8
1 LCD Screen
Screen that displays instructions and status of the reader.
2 L.E.D Display
The two lights, red or green to indicate success or failure of fingerprint identification/
verification
3 Keypads
Keys from 0-9, a Power on and off button, an OK button, an Escape/Cancel button, a Scroll
up/Check-In button, a Scroll Down/Check-Out button, a doorbell button and a menu button.
4 Speaker
Indicating success or failure of fingerprint identification by voice greetings.
5 Fingerprint Sensor
For user to place fingerprint for identification/verification. AC100 is using optical sensor
and AC100 Plus is using URU 4000 sensor.
Types of scanner
Optical scanner
Standard scanner to capture fingerprint image
URU 4000 scanner
Enhanced scanner with 512dpi to capture better fingerprint image