FingerTec R3 Manual - Manual (Page 6)

6
Enroll users, manage user data
and input workcode.
Setup FingerTec terminal’s
communication with computer
through LAN, RS and RS485.
Set security password of the de-
vice for a secure data transfer.
Configure the settings of the Fin-
gerTec terminals from general
to display setting to fingerprint.
Data management, update via
USB flash disk, keyboard func-
tions, reset and other terminal
settings can be done here.
Adjust the date and time set-
tings of the terminal.
Upload and download data and
information to and from the
FingerTec terminal using a USB
flash disk.
Run tests on the FingerTec ter-
minal to diagnose the terminal
on various aspects.
Check user attendance and
transaction logs that are avail-
able in FingerTec terminals and
perform housekeeping of the
machine.
View free and used memory of
the terminal as well as the ter-
minal’s details in system infor-
mation.
Main Menu
Battery
FingerTec terminals operate using power supply from a standard power outlet. In-
side each terminal, there is an RTC battery to keep the clock of the terminal running.
When there is a serious delay in time or the clock of the terminal reverts to 00:00 after
restarting, this indicates that the RTC needs to be replaced.
External power supply: Mini UPS (uninterrupted power supply) 1V provides mobile
power supply to the terminals. Charge the mini UPS sufficiently for optimum per-
formance.
Refer to
http://accessory.fingertec.com for more information about accessories.
Date/Time
The terminals display the date and time at the home screen. Choose the date and
time format based on your preference. Press Menu > Date/Time > Select Value > OK
to save.
Voice Control
Voice Control lets you control the level of volume emitted by the terminal.
TURN ON/OFF
The system lets you to turn on/off the voice based on your preference. Press Menu >
System > System > Voice > On/Off .