FingerTec R3 Manual - Manual (Page 19)

1
Display Settings
NUMBER OF TRIES
1:1 Match Retry Times: You can set the limit to the number of tries for the 1:1 verification
mode. The range is from 1-. If a user’s number of tries exceeds the limit, the terminal
could trigger the alarm system to alert security that somebody is meddling with the
terminal. Press Menu > System > Display> 1:1 Match Retry Times > Determine the Value
> ok to Save
Password Retry Times: You can set the limit to the number of tries for password verifica-
tion. The range is from 1-. If a user’s number of try exceeds the limit, the terminal could
trigger the alarm system to alert security that somebody is meddling with the terminal.
Menu > System > Password Retry Times > Determine the Value > Ok to Save.
Clock Mode: There are two clock modes available in FingerTec terminals. Choose the
one your prefer. Press Menu > System > Display> Clock Mode > Choose 1 or > Ok to
Save
PICTURE DELAY
Picture delay refers to the idle period before the screen displays your loaded advertise-
ment. It ranges from 0- seconds. Press Menu > System > Display > Picture Delay >
Determine your time > Ok to Save
CLOCK DELAY
Clock delay is an idle period before the screen displays your chosen clock picture. It
ranges from 0- seconds. Menu > System > Display > Clock Delay > Determine your
time > Ok to Save
Reset
Reset allows you to perform tasks:
1. Reset All Default Settings
. Reset Keyboard Settings
. Reset Other Parameters
Please make sure that you are certain of performing any of the tasks before proceeding
to avoid loss of crucial data.
Misc Settings
SLEEP TIME
Sleep time is a period before the terminal goes to sleep mode. This setting is available
as a power saving feature of the terminal. The time range is from 0- seconds. Menu
> System > Misc Set > Sleep Time > Determine your time > Ok to Save