Using usb to download data – FingerTec H2i Manual User Manual
Page 17
NOTE
We highly recommend you to contact
for this operation
Using USB to Download Data
The USB flash disk feafure is useful in cases where the terminal is installed far from a
PC or there is a connection problem. To determine the type of USB compatible with
the terminal, please refer to this link at
fingertec.com/newsletter/HL_74.html
.
USING USB FLASH DISK (PEN DRIVE)
USB flash disk can be used in the H2i for these operations:
• Downloading/uploading user information (user ID, fingerprints, cards etc)
• Downloading transaction logs
• Updating firmware
The H2i comes with a USB extension. This extension is intended for security purpose,
for without it, no USB flash disk can be inserted into the terminal to access its data.
To carry out any of the above operations, you must first plug the USB extension into
the port in the terminal and then insert the USB flash disk into the other end of the
extension. Listen to the command from the terminal. The terminal will name each
operation in sequence as shown below. You need to wave administrator card at the
induction area to confirm the relevant command.
1. To download transaction logs from terminal to USB flash disk
Green LED blinks >
“Download transaction logs”. Please wave your adminis-
trator card for confirmation > Wave administrator card at the card induction area
to confirm >
“The operation is successful”
2. To download users from terminal into USB flash disk
Green LED blinks >
“Download users”. Please wave your administrator card
for confirmation > Wave administrator card at the card induction area to confirm
>
“The operation is successful”
3. To upload users from USB flash disk into termina
l
Green LED blinks >
“Upload users”. Please wave your administrator card for
confirmation. Wave administrator card at the card induction area to confirm >
“The operation is successful”
4. To upload firmware from USB flash disk into terminal
Green LED blinks >
“Upload firmware”. Please wave your administrator card
for confirmation > Wave administrator card at the card induction area to confirm
>
“The operation is successful”