FingerTec H2i Manual - Manual (Page 13)

13 CONTENTS
At the Devices Tab, user can
either choose to add device
via
Add Device (to individu-
ally add) or Scan Device to
add multiple terminals at one
go. For single terminal, after
filling in the relevant informa-
tion, click
Add and Continue
to proceed by adding another
terminal or
Add to add only
one terminal.
To add multiple devices at one go, click Scan Device and Scan . IP Address range
can be set to search for devices. The bigger the range of IP address, the longer time
needed to scan for devices. Devices found will be displayed on the screen. Select the
preferred devices and click
Add Selected Device to add them and a window contain-
ing the settings of the terminals will pop up. Click Add to proceed.