EVCO EC6708 - Manual (Page 28)

Every Control S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY • Phone 0039-0437-852468 (a.r.) • Fax 0039-0437-83648 • [email protected] • www.everycontrol.it 28
CONFIGURATOR MENU
Configurator Menu configuration parameters
if the power of the compressor associated to the output K1 is 4 HP and
the power of the compressor associated to the output K2 is 1 HP, set the
parameter Po 1 to 8 and the parameter Po 2 to 2.
Po 2 power of the compressor associated to the output
K2
It has the same significance of the parameter Po 1.
Po 3 power of the compressor associated to the output
K3
It has the same significance of the parameter Po 1.
Po 4 power of the compressor associated to the output
K4
It has the same significance of the parameter Po 1.
Po 5 power of the compressor associated to the output
K5
It has the same significance of the parameter Po 1.
Po 6 power of the compressor associated to the output
K6
It has the same significance of the parameter Po 1.
Po 7 power of the compressor associated to the output
K7
It has the same significance of the parameter Po 1.
Po 8 power of the compressor associated to the output
K8
It has the same significance of the parameter Po 1.