Canon L380S - Manual (Page 27)

Making Connections 2-9
Setting Up Y
o
u
r Machine
2
Connect the power cord as follows:
1
Plug the supplied power cord into the power connector on the back of the machine.
2
Plug the other end of the power cord into the outlet.
NOTE
The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the
machine still needs to warm up before you can use it.
While the machine is warming up, the message appears in the LCD display:
When you connect the power cord to an AC outlet for the first time after purchase, will
appear in the LCD display after . In this case, set the language for the LCD display, and the
country*. (See “Setting the Display Language and Country*,” on p. 2-10.)
The Fax standby mode appears:
NOTE
If the toner cartridge has not been installed yet, the message appears in the LCD
display, and the Alarm indicator flashes. In this case, install the toner cartridge. (See “Installing/Replacing the
Toner Cartridge,” on p. 2-18.)
* The country selection feature is available for certain countries only.
P L E A S E W A I T
3 1 / 1 2 2 0 0 5 S A T 1 5 : 1 1
F a x O n l y S T A N D A R D