Canon L380S - Manual (Page 128)

Special Features 11-9
Making Cop
ies
11
Reserve Copy
This feature allows you to reserve the next job while the machine is printing out a current job.
1
Load the document to be reserved in the ADF.
For details on how to load documents, see “Loading Documents in the ADF,” on p. 6-3.
2
Use the numeric buttons to enter the number of copies.
You can set up to 99 copies.
3
Adjust any necessary settings for your document.
•
Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image Quality (Resolution),” on
p.11-6.)
•
Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure (Density),” on p. 11-6.)
•
Press [Enlarge/Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,” on p. 11-4.)
4
Press [Start].
The machine begins scanning.
NOTE
•
After printing of the current copy job is complete, the next copy job begins.
•
If the memory becomes full while scanning, appears in the LCD. When the ADF is used for
scanning, the document being scanned stops in the ADF.
All of the scanned documents will be erased if appears, so divide the document and copy each
part separately, or select a lower image quality mode and make copies again.
•
If the available memory decreases, and are displayed alternatively.
If memory space becomes available, the scanning begins again automatically. Also, check that the cassette is not
empty.